GH Sliding support for trapezoidal sheet metal roof PV-Mounting

GH Application
on non-walkable trapezoidal sheet roofs

GH Vorteile

• Even load distribution across the raised ribs
• Fastened with blind rivets approved by the building inspectorate
• Only 3 components required for assembly
• The profile sections are pre-drilled and sealed with sealing tape.
• Module widths can be freely selected
• Thermal expansion is compensated

Technical Data

• Art.Nr.: GH-50-EV1 / length 50mm / Aluminium anodized silver / perforated and EPDM seal

Accesories

• Art.Nr.: BN-48-12 / Blind rivets Alu/A2 Ø 4,8x12 (Pre-drill with 5.00mm)
• Art.Nr.: 2006 / Screw thin sheet/ 4,5x25 A2 SW 8 EPDM Ø 14mm
  Alternatively, the fastening can also be carried out with the thin sheet screw without pre-drilling.
• Art.Nr.: P-40-6550-xxx / Supporting profiles 40x40mm
• Art.Nr.: P-40-5500-xxx / Supporting profiles 40x40mm
• Art.Nr.: P-80-6500-xxx / Supporting profiles 80x40mm
• Art.Nr.: MMK-xxx-xxx / Module middle clamp
• Art.Nr.: MEK-xxx-xxx / Module end clamp

• 

  BN-48-12

• 

  2006

• 

  P-40

• 

  P-80

• 

  MMK

• 

  MEK

Installation tools
Drill / 5.0 mm drill bit / Blind riveter / Alternative: Thin sheet metal screw SW 8

Installation

1. Roof division depends on module dimensions.
2. Attach the GH-50 fixed point with blind rivets or thin sheet metal screws. Holes and EPDM gasket are provided.
3. Slide the GH-50 sliding support onto the P-40/P-80 system profiles. The number depends on the roof structure.
4. Slide the GH-50 into position and secure with blind rivets.
5. Attach the P-40 / P-80 profiles to the fixed point with two blind rivets each.

GH sliding support examples

Examples 1

DICONAL^® GH sliding support.

Examples 2

DICONAL^® GH sliding support.

Examples 3

DICONAL^® GH sliding support.

Examples 4

DICONAL^® GH sliding support.

Trapezoidal alternative mounting systems

Short track system P-30

DICONAL^® Short track system P-30.

Standing seam

Seam clamps for seam roofs and the DICONAL^®PV mounting system is a certified partner for Kalzip^® aluminum seam roofs.

Kalzip^® clamp

There's a perfect mounting solution for roofs. The Kalzip^® system's original clamp, combined with the DICONAL^® profile cross-section, provides the perfect basis for PV installation.

Hanger bolts

Hanger bolts are used for fastening in the roof substructure.